Sandblasted glass

Sandblasted and laminated or toughened glass

Frosted coverage can be obtained by sandblasting glass. After sand blasting the surface of glass is washed and sprayed with teflon three times. This process prevent from glass getting dirty. A high shine facade can be created by replacing the smooth unsandblasted surface outwards. The mat surface is placed inside for easier cleaning. The mat surface can also be placed outwards. Sandblasted surface can be placed indoors or outdoors. Light transmission percentage of the sandblasted glass is 50-60% depending on the intensity of the sandblast. It is also possible to sandblast only part of glass or according to a desired pattern.

Sandblasted figures

When creating figures and shapes it is suggested to choose a pattern that allows use of “mould” which is more economical than taping. The figure must be regular in order to avoid mismatches between adjacent panes. See pictures below for examples of sandblasted figures which can be created by using molding technique. Note! When placing the order it must be clearly stated which side of the glass is exterior.

Sandblasted models

Opaque (4 bar)

Sandblasted and laminated or toughened glass
	The entire glass is sandblasted The glass is partly sandblasted. The pattern overlaps the glass The glass is partly sandblasted

Patterns and figures can also be produced onto the glass by digital or silk screen printing