Lumon Glazing Retractable

Lumon Glazing Retractable

  • A balcony and terrace glazing system with sliding and hinged opening mechanism that scales according to the space, demands of the conditions, and customer needs.​
  • The frameless glazing system is inward and outward opening and upper bearing, that is developed for use worldwide on balconies and terraces. ​
  • The system consists of an upper and a lower aluminum profile which are mounted to the balcony ceiling and on handrail or floor. Toughened glass panes, with glass beads top and bottom, are mounted between the upper and lower profiles.​
  • The glass panes slide and fold open with the help of roller bearings and hinge components that are fixed to each glazing bead. ​
  • Vertical and lateral silicone and rubber sealing profiles are used to cover gaps and openings between the glazing system and the surrounding structures to ensure sufficient water, wind and sound proofing.
  • The Lumon Glazing Retractable has two strength classes; normal and strong. The normal strength is used in conventional conditions and low glazings, as the strong version of the glazing with stronger components are for challenging conditions and high glazings. The selection between normal and strong is automatic and made by the functional calculation.
  • 6, 8, 10 or 12 mm tempered glass.
  • A locking groove is milled to the top and bottom of the glass to ensure a fail-proof connection between the glass and the glass bead in addition to the adhesively bonded connection.

Lumon Glazing Retractable

Upper bearing glazing product for normal and demanding conditions. The glass panes can be open both to the inside and outside. The glazing with a low threshold can also be embedded. No vertical frames.

The upper profile is attached to the ceiling by screwing trough the profile or to an overhang by using a separate continuous bracket. The lower profile is installed to the floor by screwing trough the profile. The lower profile can also be installed on top of a balustrade. Corrosion-resistant or stainless steel fasteners, approved by the manufacturer, must be used when attaching the system to the terrace structures. Rainwater is drained off by using water sills made of a plastic-coated steel or aluminium sheet. Seals can be used to cover the gap between the wall and the glazing.

Low glazings are installed on top or at the side of a balustrade.

High glazings are installed between the celing and the floor.

A: Lumon Glazing Retractable on top of a balustrade

B: Lumon Glazing Retractable installed from foor to ceiling

C: Lumon Glazing Retractable high with low treshold profile

D: Lumon Glazing Retractable high embedded with low treshold profile

Handle types

Handles and locks

A: 1 or 2-sided handle with lock( Key+ knob or key+key) + glass counterpart

B: 1 or 2-sided middle handle with lock( Key+ knob or key+key) + wall profile counterpart

C: Handle without lock, no counterpart

Lift handle

A: Lift handle (child lock can be added)

Pane knobs

A: Pane knob

B: Pane knob chamfered

C: Pane knob with seal

Accessories

Stacking device
Accessory. Available for 6 and 12 panes
Ventilation child lock
Accessory. Makes it possible to lock the opening pane when used with the latch lock 50220039

Sections of the Lumon Glazing Retractable Download dwg

A: Glazing without telescopic profile

B: Glazing with telescopic profile

C: Glazing with high telescopic profile

D: Glazing with flanged telescopic profile

Sections of the Lumon Glazing Retractable with low threshold profile Download dwg

A: Glazing without telescopic profile

B: Glazing with telescopic profile

C: Glazing with high telescopic profile

D: Glazing with flanged telescopic profile