Side installed post railing
Lumon post railing
Lumon post railing is installed with a system based on mast attachment method. Post distribution is affected by loads due to environmental conditions on site, properties of posts and the fastening method. At its most typical the distribution is 800...1500mm.
The railing element can be installed either on top or to the facade of a balcony slab. When attached to the slab facade, hat bracket is to be used, while a steel pedestal is used when the element is attached on top of the slab. Slab thickness must be between 160 and 300 mm.
Side installed railings
Railing installed on slab facade Cladding can be either inside or outside. The slab can be covered with the Facade cover profile as well. Slab crossing is also possible. | |
1a. Handrail 220 1b. Handrail 160 1c. Handrail 130 2. Post handrail bracket 3. Post 75x32 4. Cladding 5. Lower gap profile + junction profile 6.Post bracket 7. Lower frame 8. Facade cover profile 9. Lower gap profile |
Side installed railing with special cladding In addition to outside special cladding, a balustrade can have an inside cladding. Slab crossing is also possible. Special cladding is not included in Lumon delivery. | |
1a. Handrail 220 1b. Handrail 160 1c. Handrail 130 2. Post handrail bracket 3. Post 75x32 4. Cladding 5. Lower frame 6. Post bracket 7. Plaster board 8. U profile 9. Sheet metal cladding |
Side installed railing with a decorative pipe In addition to the decorative pipe installed over the handrail, with inside cladding it is possible to choose Ø20mm horizontal decorative pipes in facade of the support post | |
1a. Handrail 220 1b. Handrail 160 1c. Handrail 130 2. Post handrail bracket 3. Post 75x32 4. Cladding 5. Lower gap profile + junction profile 6. Post bracket 7. Lower frame 8a. Decor profile Ø40 + bracket 200mm 8b. Decor profile Ø40 + bracket 200mm + Decor profile Ø20 + bracket 9. Decor profile Ø20 + bracket |