Lumon Roof

Serene

Serene is an eaveless verion of the roof that creates a light, simple and airy impression.

  • Roof angles 4-25°
  • Fixed to building
  • No side eaves
  • No front overhang
  • Fully integrated water drainage
  • Internal rafters

The frame profiles are always made of aluminum. The roof has three roof beam sizes, three horizontal beam sizes and two different rear beams, from which the system automatically selects beams to optimize the right roof for each project. The aluminum frame posts at the front are 120x120 mm, at the rear 60x120 mm. Middle posts can be added under the frame to increase load-bearing capacity. The glazing can be cut off at the middle post or installed inside or outside the post glazing, so that the glazing remains continuous.

The roof beams and glazing beads are always made of aluminum profiles. The Serene roof does not have front or side eaves. The roof glass is tempered clear or mass-colored glass. The maximum size of the roof glass is 1000x4500 mm. Roofs deeper than this has a glass joint. The glass panes are joined with two profiles glued to the glass with a seal between them. The gable glass is always 6 mm tempered and consists of two parts. Rainwater management always includes a fully integrated aluminum gutter. The downpipes of the rainwater system are also fully integrated into the front post. A snow guard is also available for the roof.

Classic

A timeless model with side and front eaves. Provides good weather protection and gives a traditional look to the terrace

  • Roof angles 4-25°
  • Fixed to building
  • Side eaves 250 mm
  • Front overhang up to 320 mm
  • Partly integrated water drainage
  • Internal rafters

The frame profiles are always made of aluminum. The roof has three roof beam sizes, three horizontal beam sizes and two different rear beams, from which the system automatically selects beams to optimize the right roof for each project. The aluminum frame posts at the front are 120x120 mm, at the rear 60x120 mm. Middle posts can be added under the frame to increase load-bearing capacity. The glazing can be cut off at the middle post or installed inside or outside the post glazing, so that the glazing remains continuous.

The roof beams and glazing beads are always made of aluminum profiles. The Classic roof haas side and front eaves. The sice eaves are made of polyester coated aluminium. The roof glass is tempered clear or mass-colored glass. The maximum size of the roof glass is 1000x4500 mm. Roofs deeper than this are has a glass joint. The glass panes are joined with two profiles glued to the glass with a seal between them. The gable glass is always 6 mm tempered and consists of two parts. Rainwater management always includes a visible aluminum gutter. The downpipes of the rainwater system are integrated into the front post. A snow guard is also available for the roof.

Even

  • Roof angle is hidden with facade profiles
  • Roof angles depends on depth
  • Fixed to building
  • No side eaves or front overhang
  • Fully integrated water drainage

The frame profiles are always made of aluminum. The roof has three roof beam sizes, three horizontal beam sizes and two different rear beams, from which the system automatically selects beams to optimize the right roof for each project. The aluminum frame posts at the front are 120x120 mm, at the rear 60x120 mm. Middle posts can be added under the frame to increase load-bearing capacity. The glazing can be cut off at the middle post or installed inside or outside the post glazing, so that the glazing remains continuous.

The roof beams and glazing beads are always made of aluminum profiles. The Even roof does not have front or side eaves. The roof angle is hidden behind facade profiles. The roof glass is tempered clear or mass-colored glass. The maximum depth of the Even roof is 4000mm. The roof doesn't have gable glasses. Rainwater management always includes a fully integrated aluminum gutter. The downpipes of the rainwater system are also fully integrated into the front post.