Structure details


Wall junctions VT3
	A: Fastening into a concrete wall with conctrete screws or anchors c/c max. 1200mm between fixing points B: Fastening into a supporting wall with wood screws c/c max.1200mm between fixing points
A
B
Floor junctions VT3
	Fastening the rear posts to the foundation. The screws according to the foundation material

	Fastening the front posts to the foundation. The screws according to the material

Side post VT3
	A side post (90x50) doesn’t divide the glazing. It is mounted on the outside of the front- or side beam

Snow guard VT3
	The snow guard is fastened in the glazing bead with 6,3x32 screws in line with the outer edge of the front beam.


Wall junctions VT4
	A: Fastening into a concrete wall with conctrete screws or anchors c/c max. 1200mm between fixing points. (8mm glass cladding) B: Fastening into a supporting wall with wood screws c/c max.1200mm between fixing points. (8mm glass cladding)
A
B
Floor junctions VT4
	Fastening the 70x70 posts to the foundation. The screws according to the foundation material

	Fastening the 90x90 front posts to the foundation. The screws according to the material

Side post VT4
	A side post (70x70) doesn’t divide the glazing. It is mounted on the outside of the front- or side beam with a mounting bracket

Snow guard VT4
	The snow guard is fastened to the end plugs of the roof rafter with 5,5x35 screws. The screw is fastened from the inside of the end plug.


Balcony roof VT4
	Fastening into a concrete wall with conctrete screws or anchors.