Lumon Roof VT4

Lumon roof VT4

The aluminium front beam is also used as side beam. The front beam can be reinforced. The front aluminium posts are 70x70mm or 90x90. The rear posts are always 70x70mm. A middle post that divides the glazing, is made of 70x70 mm or 90x90mm aluminium. When a continuous glazing is needed, a 70x70 mm post is used

Fixed end glazing is not possible if the side overhang exceeds 70mm. A fixed wall can be installed however. The rear beam is always aluminium

The roof rafters and the glazing beads that are exposed to weather conditions are made of aluminium. The roof glass is clear or coloured toughened glass. Maximum size of a roof glass is 900x4495mm. Roofs deeper than this, are made of two glass panes. In the gap between the panes an extension seal ensures that the roof ramains waterproof. The gable glasses are always 2-part 6mm toughened glass. The rain gutter is included in a standard delivery, drain pipes and snow guards are optional

Placing of the Lumon Roof VT4 at a building

One plan can include 7 projections. All projections must have the same roof angle. The roof rafters are always parallel. A roof rafter is always placed in junction of the projections

Lumon Roof VT4 models Download dwg

Rectangular roof side and front overhang possible

Multi projection roof 2-7 projections, side and front overhang possible

Balcony roof Only one projection possible. No posts. Side and front overhang possible

Roof only 1-7 projections. No frame structures. Side and front overhangs possible