Brickwork structures

Top installed frame and 160mm handrail with vertical bracket

With top installed frame, the minimum overhang of side wall is 30mm, recommended 50mm DET. 9

Installing horizontal bracket to a brick wall DET. 8 Brickwork is to be supported with extra iron fittings according to structural designer: in brick seams at corners, a 7mm rustproof rebar pair around the corner, reaching two brick lengths to both directions. Extra brick facade screws to seams at installation point.

Dewatering through slab edge.

Handrail wall brackets' adjustment range is +-10mm vertically and +-25mm horizontally

Top installed frame and 160mm handrail with vertical bracket, 90° railing

With top installed frame, the minimum overhang of side wall is 30mm, recommended 50mm DET. 9

Installing horizontal bracket to a brick wall DET. 8 Brickwork is to be supported with extra iron fittings according to structural designer: in brick seams at corners, a 7mm rustproof rebar pair around the corner, reaching two brick lengths to both directions. Extra brick facade screws to seams at installation point.

Dewatering through slab edge.

Handrail wall brackets' adjustment range is +-10mm vertically and +-25mm horizontally

With top installed frame, the minimum overhang of side wall is 30mm, recommended 50mm DET. 9

Installing horizontal bracket to a brick wall DET. 8 Brickwork is to be supported with extra iron fittings according to structural designer: in brick seams at corners, a 7mm rustproof rebar pair around the corner, reaching two brick lengths to both directions. Extra brick facade screws to seams at installation point.

Dewatering through slab edge.

Handrail wall brackets' adjustment range is +-10mm vertically and +-25mm horizontally

Supporting a corner to a pillar DET. 10.

In brick seams at corners, a 7mm rustproof rebar pair around the corner, reaching two brick lengths to both directions. Extra brick facade screws to seams at installation point.